Loading... Please wait...
  • Gift Certificates
  • My Account 

Currency Displayed in

How to replace the LIS1442 battery in your Sony PS3 Move Navigation Controller

Posted by


Use this step-by-step repair guide to help you replace the LIS1442 battery in your Sony PS3 Move Navigation Controller.


Necessary Replacement Parts:


Necessary Replacement Tools:

Note: Above tools are included for FREE when this replacement battery is purchased from mpfproducts.com.


Step 1

  • Using the #00 screwdriver, remove the four (4) Philips screws from back of the controller. Carefully release the rear panel. Take care when removing the rear panel as there is still a ribbon cable connected from the front to the back at this point.


Step 2

  • The ribbon cable is easy to disconnect, gently tug on cable and it should release. You may choose to remove or not remove the ribbon cable at this step depending on your comfort level with the repair.

Step 3

  • The battery should be able to be simply disconnected at this point. Gently pull the battery connector out of the socket on the board.


Step 4

  • Once this battery is removed, replace with your new

LIS1442 Battery Pack for Sony PS3 Move Navigation Controller

(pictured below) and follow the steps in reverse order to reassemble your controller.

LIS1442 Battery Pack for Sony Move Navigation Controller




 

What's News

Copyright 2024 MPF.All Rights Reserved. MPF Products® is a Registered Trademark.
 Sitemap |